Proximity reader Roger MCT68ME-IO-O

Indoor dual proximity reader with keypad MCT68ME-IO-I
The MCT68ME-IO-O is an identification terminal designed for use in the RACS 5 system. The readers act as a slave device to the access controller and cannot independently supervise the passage. The device can recognize users via PIN codes and/or proximity cards of the 13.56 MHz MIFARE® Ultralight/Classic standard and the EM125kHz (UNIQUE) standard. The MCT68MEIOI terminal supports reading the serial number (CSN) of an EM 125kHz or MIFARE proximity card. The MCT68ME-IOO is equipped with a practical 12-button numeric keypad. It makes it possible to open the door easily and quickly by entering the appropriate PIN code. An additional advantage of the reader is also 4 additional function keys to which you can assign virtually any function of the RACS 5 system.

The readers are equipped with a set of input and output lines, which in most cases allows complete operation of the passage without using inputs and outputs located on the access controller or expansion module. The MCT68ME-IO-O is mainly used as a time and attendance (T&A) terminal. The device is available in an outdoor mounting version using the ME-7 metal housing. The terminal has an RS485 interface through which it is connected to the communication bus of the MC16 controller, and is equipped with a four-line LCD display and a set of four programmable function keys.

Main features:

• waterproof class: IP54
• protective metal housing
• dedicated to RACS5 system
• card support: EM 125kHz UNIQUE (EM4100/4102), 13.56MHz ISO 14443A, MIFARE Ultralight/Classic
• operation in terminal mode
• power supply: 12V DC
• three NO/NC inputs
• two transistor outputs with load capacity 1A/15V
• one relay output with load capacity 1.5A/30V
• readout range: up to 7 cm
• communication interface: RS485
• protection class: IP41
• built-in keypad
• four programmable function keys
• built-in LCD display
• average current consumption: 100 mA
• three LED indicators
• defining the resting polarity of the output line
• signaling speaker with adjustable sound level
• tamper sensor (Tamper)
• detection of opening the case and detachment from the ground
• firmware update via RS485
• keypad with adjustable backlighting level
• recommended as Time & Attendance terminal

Technical specifications:

Power supply voltage	Nominal 12VDC, acceptable 10-15VDC
Current consumption (average)	approx. 100mA
Inputs	Three (IN1..IN3) two-state NO/NC input lines internally polarized to supply plus via 15kΩ resistor, switching threshold approx. 3.5V
Relay outputs	Relay output (REL1) with single NO/NC contacts, load capacity 30V/1.5A DC/AC
Transistor outputs	Two transistor outputs (IO1, IO2) open collector type, max load 15VDC/150mA
Reading range	Up to 7 cm
Tamper protection (TAMPER)	Isolated contacts 50mA/24V, shorted when enclosure is closed
Cards	EM 125 kHz UNIQUE, compatible with EM4100/4102 and 13.56MHz compatible with ISO14443A and MIFARE
Distances	Up to 1200m RS485 bus length between controller and reader
Reading range	Up to 10 cm for EM125kHz cards Up to 7 cm for MIFARE cards
Protection class	IP54
Operating temperature	-25°C ~ +60°C
Humidity	10% ~ 95% (non-condensing)
Weight	approx. 1150g
Dimensions (W/H/D)	156x220x100mm