Wireless system transmitter ZP-2/TX

The ZP-2 wireless system allows wireless control of devices, using the 433 MHz ISM band. The remote control includes 2 separate channels. Each channel is controlled by one dedicated input on the transmitter. On the receiver side, a separate NO/NC relay is assigned to each channel. The maximum load of each relay is 2300 W (AC), making the system suitable for a very wide range of applications. The set of ZP-2 devices allows you to wirelessly control, for example, lighting, electrically controlled sprinklers, powering household appliances, etc.. With the help of the system, it is also possible to realize the control of automatic roller blinds or gates. The way the ZP-2/TX transmitter is controlled also makes the device ideal for integration with access control and alarm systems, allowing installation of, for example, door open buttons, panic buttons or detectors in places where laying additional cables is difficult or impossible. The system consists of a transmitter and a receiver, but connections in any configuration are possible: (1:1, 1:N, N:1, N:N). A maximum of 128 transmitters can be assigned to each receiver, while the number of receivers that can work with a single transmitter is limited only by the transmission range.The system allows operation in one of three modes: monostable (the relay is on as long as the input in the transmitter is shorted), bistable (momentary input shorting causes a change in the relay's operating state) and timed (momentary input shorting causes a change in the relay's state for a defined time). Attention! The device requires a ZP-2/RX receiver for cooperation.

Technical specifications: