AXON-RS485 Symmetrical RS-485 Line Surge Protector

Surge arrester AXON-RS485 is designed for surge protection of electronic devices working in industrial camera control systems based on RS-485 transmission or its variants with a voltage not higher than 5V AXON-RS485 contains protective elements that limit surges occurring between the transmission line and PE protective conductor, allowing the interference charge to be discharged to the ground The device also uses elements that limit dangerous voltages, The device also uses elements limiting dangerous voltages that may appear between the lines
AXON-RS485 thus comprehensively protects the devices connected to it AXON-RS485 has a metal, shielding casing As connecting elements, detachable terminal connectors are used Terminals A, B are used to connect the protected transmission lines, while the third terminal can be used by the installer, if necessary, as a signal ground The ground wire, terminated with a fork tip, is led outside and connects directly to the casing. The device is an unbalanced protector. The transmission line is connected to the "Line" terminals, while the protected device is connected to the "Equip" terminals A prerequisite for proper operation of AXON-RS485 is that it is connected to an efficient ground or PE protective conductor.

Rated voltage:	6 V
Maximum voltage:	10 V
Rated current:	0.75 A
Nominal discharge current (line-to-line) [C3]:	25 A - 10/1000 µs
Nominaldischarge current (line-to-ground) [C2]:	5 kA - 8/20 µs
Up line-to-line protection voltage for znamin current [C3]:	≤ 16 V - 1 kV/µs
Line-to-ground protection voltage [C2]:	≤ 1000 V - 1.2 kV / 50 µs
Line series impedance:	≤ 2 Ω
Frequencyresponse:	0 MHz ... 1 MHz
Line-to-line capacitance:	50 pF
Line-to-ground capacitance:	16 pF
Connectors:	2x triple screw terminal detachable, 1.5 mm², 3.5 mm spacing
Protection parameters:	Complies with PN-EN61643-21
Housing:	Metal, black
Weight:	0.07 kg
Dimensions:	69 x 32 x 20 mm