Extralink CAT6 FTP (F/UTP) External Gel-Filled | Twisted Pair Network Cable | 305M

Main features:

• Extralink waterproof cat 6 F/UTP copper twisted pair cable.
• Outdoor use.
• Shielded with aluminum-polymer foil.
• Outer sheath made of PE with a thickness of 0.6 mm.
• Cable length: 305m.
• Cable category: cat.6.
• Type of cable shielding: F/UTP.
• Frequency: 250 MHz.
• Cable insulation: F/UTP (FTP).
• Jacket material: Polyethylene (PE).
• AWG cable size: 23/1.

Extralink cat. 6 FTP/UTP

Extralink's Cat. 6 F/UTP waterproof twisted pair copper cable is designed for outdoor applications. It is constructed of four pairs of twisted copper conductors, which are color-coded and protected, with waterproof tape. The cable is shielded with aluminum-polymer foil. The outer PE sheath is 0.6 mm thick. The cable, which conforms to numerous standards, meets the cabling requirements of ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568-C.2 and IEC 61156-5, EN 50288-6-1.

Application of cat. 6 F/UTP 4PR 23/1 AWG PE cable.

Cables of this category are protected against moisture, they are ideal for use in outdoor installations, such as telephone ducts, collectors, as well as on the walls of buildings in conditions of increased electromagnetic influence. The cable's construction and the use of water-blocking tape provide protection against moisture in outdoor environments. The cable operates at frequencies up to 250 MHz. It is compatible with PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T, HDBaseT, PoE, PoE+, PoE++. The cable has good mechanical properties and electrical characteristics, and has a wide operating temperature range.

• During installation - bending radius ≥10 diameters, temperature from -15°C to 60°C
• After installation - bending radius ≥4 cable diameters, temperature from -50°C to 60°C
• Tensile stress ≤85 N

Layered F/UTP cable construction for full protection

The nominal diameter of the cable is 7.8 mm. Thanks to its composite construction, the cable complies with Cat. 6 F/UTP standards:

• Conductor - 0.54 mm/23 AWG soft copper wire strands
• HDPE insulation with a diameter of 1.07 mm
• The pair consists of two insulated conductors twisted together in standard identification colors:
  white-blue and blue, white-orange and orange, white-green and green, white-brown and brown
• HDPE layer 4×4 mm
• Core protection layer - waterproof tape
• Copper tinned contact wire 0.4 mm thick
• Core shield - aluminum-polymer film screen (metal outside)
• Sheath made of 0.6 mm thick PE layer

The wire allows a wide range of applications and provides high water resistance with proper insulation of its ends.

Technical specifications: