Ropam NEOLTE-IP-SET Alarm Control Panel

Main features:

Support for temperature and humidity sensors (wired, wireless) Room thermostat function (support for 1 heating zone) Control of outputs to control automation elements possible via: mobile application RopamNeo, SMS, DTMF, CLIP (KeyGSM) AI 0-10V analog input to control physical parameters e.g. battery voltage, humidity [%RH], temperature, etc. Graphical block logic editor (DiagramEditor) Advanced logic functions, arithmetic functions, counters, timer relays Up to 10 independent logic conditions, (If...Then...Else blocks) Up to 20 time relays to implement time-logic functions Diagram Editor - graphical logic wizard or script editor (C scripting language)

Ropam's NeoLTE-IP-SET, which includes the NeoLTE-IP control panel, supported by the PSR-ECO-2012 buffer power supply, AT-GSM-MINI90 antenna and O-R3P enclosure, is a perfect combination of alarm system and home automation, using GSM / LTE and WIFI connectivity. Its modern design and advanced technology blend perfectly with a variety of spaces and interiors.

Software: Programming and configuration of the system is done using dedicated software NeoGSM-IP Manager. This is an intuitive-to-use application that allows configuration of the entire system including expansion modules. Programming from a computer requires physical connection to the control panel, which is made via a microUSB port. DOWNLOAD LINK.

Modular design and integration

The control panel offers extensive expansion possibilities thanks to its modular design. A variety of sensors (motion, smoke, flooding, etc.), sirens and building automation devices can be connected to it. The integrated IP module allows remote control and monitoring via mobile applications (e.g. RopamHome) and cloud services.
Building automation management

NEOLTE-IP-SET not only acts as a control panel, but also as a home automation management system. It is possible to control lighting, gates, blinds, heating and other elements of a smart home. The system supports automation scenarios that can be customized according to the user's needs (e.g. "leaving the house" - closing the blinds, arming the alarm, turning off the lighting).


Easy installation and configuration

The kit is designed for easy installation. Configuration of the control panel is done through dedicated software, which allows customization of settings to meet specific user needs. Advanced diagnostic tools and remote technical support are provided for installers.

Ropam has prepared RopamNeo software for managing an alarm system based on the NeoLTE-IP control panel. Remote connection of the application with the control panel via LTE / GPRS or the Internet (dynamic IP address) is possible through the RopamBridge server.

NEOLTE-IP technical specification:

Power supply voltage	U = 9V ~ 14V/DC min/max @ 1.5A min (PSR-ECO-5012-RS/2012 power supply required)
DC power supply failure indication	U<11V
Load capacity of controlled outputs: O1, O2 and power supply AUX, KBD	In = 1.0A (continuous), Ipeak = 1.3A (momentary)
Short-circuit and thermal protection of outputs: O1, O2, AUX, KBD	Ilim = 1.0A ~ 1.7A, Tj, Tc= 125 °C (condition: short-circuit current limitation or output overload)
Load control for outputs: O1, O2	2KΩ max. line impedance
Load capacity of outputs O3-O8	700mA @30Vdc
Current consumption of control panel systems (without outputs)	300/95/70 - max/average
Wifi off, GSM off, Eth	-15mA, -10mA, +30mA
LTE modem	Support for 4G and 2G networks, (LTE-FDD: B1/B3/B5/B7/B8/B20/B28)
GSM operating frequency of the modem	850 / 900 / 1800 / 1900 MHz
WIFI module	In 802.11 b/g/n, 2.4 GHz, with built-in PCB antenna on the case
Type of data transmission	SMS, VOICE, GPRS
Audio signal: AUDIO IN, AUDIO OUT (VSR connector)	2 Vrms
Binary inputs (programmable)	NO, NC, EOL, 2EOL/NC, 2EOL/NO = hi-Z/~30Ω, ~30Ω/hi-Z, hi-Z/2k2, 1k1/2k2, 2k2/1k1 line impedance for type: no violation / violation
Inputs of temp sensors.	T1 - T2 (Data), GND, +VT (3.3V)
Analog input (programmable)	Uin = 0 - 10V / DC (max.) (impedance Z = 30KΏ , resolution 10mV, accuracy 1% of the whole range)
System communication	Mag

Technical specification PSR-ECO-2012:

Supply voltage and current	Uin = 195V ~ 265V/AC 50Hz, Irms = 0.25A max.
Inrush current of the power supply	11A@2ms - no load
Output voltage of the power supply	Uout = 13.8VDC +0.5V/-1V when no ACU Un = 13.8VDC (@20°C, Iout=0A) Uout = 9.5VDC to 14.3V when ACU connected
DC voltage ripple voltage	100mV p-p max
Charge voltage auto-compensation parameter	-3 [mV/°C/cell] +/- 20% above Design Temperature 20 °C +3 [mV/°C/cell] +/- 20% below Design Temperature 20 °C
Power supply output power (current capacity)	20W (1.5A max.)
Total power of the power supply	25W
Energy efficiency	88% ~ 91%
No-load energy consumption from ~230V mains (Iout=0, Ibat=0)	0.39W (S = 3.5VA)
AC power failure indication	Technical output ACok
DC low voltage failure signaling	Uout min +1V (+/-5%)
Discharged battery cut-off voltage Uout min	Uout<10V without load Uout <10.4V@Iout 1.5A
Output load capacity +V, GND	In = 1.5A (continuous) Ipeak = 2A (momentary)
Short-circuit protection of the boost converter	Ilim = 1.8A (+/-5%), (condition: short-circuit current limit or output overload)
Short-circuit protection, thermal output protection: +BAT	PTC 1.85A
Load capacity of outputs FBAT, ACok	FBAT: 100mA@30Vdc max (no short circuit protection) ACok: 5mA@12VDC
Output type: FAC, FBAT	OC (Open Collector, open collector)</td

O-R3P Technical Specifications:

Control panels and modules	Ropam
Tamper protection	Ropam tamper - tamper micro switch
Tamper	Opening, meets the requirements of the PN-EN 50131 standard
Application	Indoors
Design	ABS plastic Grilles included
Color	RAL 7035 (light grey)
Closing	Screwed x4 from the front of the case
Space for battery	7Ah/12 Lead-acid dry (SLA)
DIN rail (TH35)	For mounting PSR-ECO power supply unit
GSM, WIFI antenna mounting inside the enclosure	Yes
Dimensions (W/H/D)	External enclosures: 264x253x85 [+/-2mm].