External dual motion sensor PIR+MW OPAL PLUS GY

OPAL Plus is an outdoor dual-mode motion detector, which is ideal for use both outside the protected building and in interiors with difficult or specific environmental conditions (e.g. halls, sheds). The OPAL Plus detector is equipped with PIR and MW technologies, as well as an AM function realized by the microwave path. The dual technology, combined with the detector's auto-adaptation algorithm to environmental conditions, ensures high resistance to false alarms, and thus stable operation in harsh atmospheric conditions such as rain, snow, sunshine and strong gusts of air. The device offers correct operation in a wide temperature range: from -40°C to +55°C, and changes in ambient temperature are automatically compensated.

The OPAL Plus detector features a detection angle of up to 100 degrees and a range of more than 15 meters. The area under the detector is also protected, so that any attempt by an intruder to approach under the device to damage or break it will be detected. In addition, the software of the OPAL Plus series detectors has been developed so that the movement of small pets does not cause false alarms. The OPAL Plus detector is additionally equipped with a twilight sensor that controls the OC output, which also allows it to be used in home automation alarm systems - without the need to install additional twilight detectors. The signal from the low-current output can be given directly to a relay located in the electrical switchboard or to a home automation controller. The detector can also work with the KNX system via the INTEGRA series control panel. Thus, the functionality of OPAL Plus allows simple and convenient control of, for example, roller blinds, building exterior lighting, garage door or entrance gate, and the moment of triggering can be selected thanks to precise sensitivity adjustment. A great convenience for the installer is the function of remotely changing the sensitivity of all detection paths and the twilight sensor using the OPT-1 remote control, which eliminates the need to repeatedly open the detector housing to change the settings.

The housing of the device is also unique, for the production of which two-component injection technology was used. This has resulted in a splash-proof design with an IP54 rating, providing OPAL Plus electronics with protection against harmful atmospheric phenomena. The detector's housing also features high mechanical strength and UV resistance.

The OPAL Plus detector's design allows it to be mounted directly on a flat surface. If the detector is to be tilted vertically or horizontally, special brackets from the BRACKET C (white) or BRACKET C GY (gray) set should be used: angle or ball.

The OPAL Plus detector is available in two color versions: white (OPAL Plus) and gray (OPAL Plus GY).

• two detection paths: PIR and microwave
• AM function realized by the microwave track
• built-in twilight sensor allowing the detector to be used in automation systems
• configuration of sensitivity of detection paths and dusk sensor by means of buttons on PCB
• built-in OPT-1 infrared remote control signal receiver
• remote configuration of the sensitivity of the detection paths and the twilight sensor by means of the OPT-1 remote control without the need to open the detector housing
• splash-proof polycarbonate housing with IP54 protection class
• tamper protection against opening and tearing off
• digital temperature compensation to ensure correct operation of the detector in the temperature range from -40°C to +55°C
• ability to operate in adverse weather conditions (rain, snow, fog, strong wind)
• high immunity to false alarms due to autoadaptation algorithm
• protection of the area under the detector
• option of not detecting small animals (up to 20 kg)
• low power consumption
• possibility of mounting directly on a flat surface or using dedicated brackets from BRACKET C set:
• angle mount: fixed angle of 45°
• ball mount: range up to 60° vertically and up to 90° horizontally

Technical specifications:

Power supply voltage (±15%)	12 V DC
Detectable movement speed	0.3...3 m/s
Operating temperature range	-40...+55 °C
Recommended installation height	2,4 m
Standby current consumption	15 mA
Maximum current consumption	20 mA
Permissible relay contact load (resistive)	40 mA / 16 V DC
Maximum humidity	93±3%
Dimensions	65 x 138 x 58 mm
Environmental class as per EN50130-5	IIIa
Alarm signaling time	2 s
Compliant standards	EN50131-1, EN50130-4, EN50130-5
Microwave frequency	24 GHz
Start-up time	40 s
IP degree of protection	IP54
Detector weight (without handle)	176 g
Permissible load of D/N output (OC type output)	50 mA / 12 VDC
Grade of protection	Grade 2

"Source: SATEL sp. z o.o., www.SATEL.pl".