Ropam Neo-IP-64-SET Wi-Fi Alarm Control Panel

Main features:

• 4 independent zones with two types of armed: full or night,
• 16-64 programmable zones, expansion via zone expanders, touch panels,
• 8-40 programmable outputs, expansion through output expanders, + support for up to 32 roller shutter modules (bus or radio),
• hybrid control panel: wired + Ari wireless system,
• support for up to 32 users (1 main +31), 8 phone numbers, 8 e-mail,
• support for up to 4 touch panels (TPR-4 series) or touch keypads (TK-4),
• LTE modem operating in 850/900/1800/1900 MHz bands (NeoLTE-IP-64 versions),
• in the case of the Neo-IP-64 version, the possibility of later expansion with an LTE module,
• built-in WIFI module (including connector and antenna for the housing),
• IP communication: WIFI/LAN primary channel, backup channels: GPRS/LTE (NeoLTE-IP-64),
• wired LAN connection option via expander: EXP-LAN,
• dedicated RopamNeo mobile application, for online surveillance and remote control,
• 2 RopamNET communication buses for connecting touch panels, expansion modules,
• 1 TSR bus for connecting temperature and humidity sensors,
• 4 timers with calendar, for control and automation,
• built-in LogicProcessor for creating advanced logic functions,
• programming: local via micro USB or WIFI/ETH, remote via GPRS/IP or LTE depending on version,
• USSD code support (prepaid card control),
• convenient detachable terminal connectors, grouped by port,
• possibility to update software via USB cable or WiFi,
• 12V DC power supply, supervised system power supply PSR-ECO-5012-RS or PSR-ECO-2012 required for power supply

Neo-IP-64 control panel with peripherals is a solution for integrating electronic burglary and assault signaling system and home automation. WI-FI module allows remote control and control of the system. In addition, the NeoLTE-IP-64 version is equipped with a modem supporting the LTE network. Thanks to its modular design, the system can be expanded and adapted to the changing needs of the user. The design and functions comply with PN-EN 50131-3, grade 2.

An alarm system built on the basis of Neo-IP-64 series control panels is an ideal solution for residential and small commercial buildings. Modern design, proven technology allows it to blend in perfectly with most interiors and rooms. Intuitive and clear interface, makes the control of the alarm system has never been so simple. The touch panel, combined with the control panel, allows you to build a fully functional alarm system. The Neo-IP-64 control panel also allows you to create simple home automation applications, with remote control via SMS and via the RopamNeo mobile application.

Building automation functions:

• support of 4 TSR or RHT temp and humidity sensors TSR bus,
• support for 8 temperature, humidity and air quality sensors RopamNET bus
• support for 8 heating zones (room thermostat function),
• support for 4 EXP-SROL8-RN roller shutter controllers
• handling of 2 lighting controllers EXP-LIGHT16-RN
• 4 macros (sequence) for calling from touch panels or applications
• control of outputs to control automation elements possible via: RopamNeo mobile application, SMS, DTMF, CLIP (KeyGSM),
• AI analog input 0-10V or 4..20mA to control physical parameters e.g. battery voltage, humidity [%RH], temperature, etc,
• Integration with other automation systems via ModBus TCP/IP or MQTT protocol

Notification / Control:

• SMS notification and control independent messages for system events,
• PUSH notification to RopamNeo mobile application,
• VOICE/CLIP: independent voice call for events in the system with voice messages (possibility to upload up to 16 messages directly to the control panel , AMR-1 wiretap),
• E-MAIL: independent e-mail messages for events in the system, SMTP server support (SSL/TSL),
• GPRS monitoring: cooperation with Ropam Monitoring Software station/server, with Kronos NET station (RopamDirect controller) or SafeStar encrypted TCP/IP transmission, two IP addresses, backup SMS transmission, parallel operation with SMS/VOICE notification mode,
• built-in SIA-IP communication protocol,
• possibility to operate via RopamNeo mobile application

LogicProcessor:

• graphical, block logic editor (DiagramEditor)
• advanced logic functions, arithmetic functions, counters, time relays,
• Up to 20 independent logic conditions, (If...Then...Else blocks),
• up to 20 time relays to implement time-logic functions,
• logic wizard or script editor (C scripting language)

Technical specifications of the Neo-IP-64 PBX:

• GSM modem: Quectel (Quad-Band, GPRS class 10, CSD).
• GSM frequency of modem operation: 850/ 900/ 1800/ 1900 MHz (automatically switched)
• data transmission type:
  ♦ SMS
  ♦ VOICE
  ♦ GPRS
• AUDIO IN, AUDIO OUT audio signal (VSR connector): 2 Vrms.
• binary inputs (programmable):
  ♦ NO, NC, EOL, 2EOL/NC, 2EOL/NO= hi-Z/~30Ω, ~30Ω/hi-Z, hi-Z/2k2, 1k1/2k2, 2k2/1k1
  ♦ line impedance for type: no violation/violation
• temp sensor inputs: T1-T2 (Data), GND, +VT (3.3V)
• analog input (programmable): Uin= 0-10V/DC (max.) (impedance Z=30KΏ , resolution 10mV, accuracy 1% of the whole range)
• system communication:
  ♦ EIA-485 - RopamNET system bus
  ♦ USB B/microUSB - connection to service computer (communication, upgrade)
• short-circuit and thermal protection for outputs O1, O2, AUX, KBD: Ilim=1,0A÷1,7A, Tj, Tc= 125 °C (status: short-circuit current limitation or output overload)
• load control for O1, O2 outputs: 2KΏ max. line impedance
• load capacity of O3-O8 outputs: 700mA @30VDC
• load capacity of controlled outputs O1, O2, and power supply outputs AUX, KBD: In=1.0A (continuous), Ipeak=1.3A (momentary)
• DC power supply failure indication: U<11V
• environmental class: II
• operating temperature: -10°C...+55°C
• humidity: 20%...90% RH, non-condensing
• AWG connectors: 24-12, disconnectable
• power supply: 12V/DC with DC voltage control, a supervised, intelligent, system power supply is required for power supply: PSR-ECO-S12-RS
• current consumption of control panel systems (without outputs): 300 (max.) / 95 (avg.) / 70 (min.); Wifi off = - 15mA, GSM off = -10mA, Eth = +30mA
• dimensions: 156 x 88 x 25mm
• net weight: 125g

Main features of PSR-ECO-5012-RS:

• input voltage: 195 ~ 265V AC
• power output:3A / 13.8V DC
• no power output on connectors
• three functions:
  ♦ regulated power supply
  ♦ battery charger
  ♦ UPS 12V DC or 24V DC voltage.
• high energy efficiency: 88 ~ 91%
• increased galvanic isolation PRI/SEC: 3.5kV
• protections: OCP, SCP, OHP, OVP, UVP
• housing: modular DIN 6M
• two-phase battery charging: constant-current and constant-voltage
• high EMC and ESD immunity for industrial-grade equipment and low emissions as for domestic equipment
• passive cooling and low heat emission
• support of 12V lead-acid batteries
• power supply power:
  ♦ output: 50W
  ♦ total: 65W
• system communication: EIA-485
• II environmental class
• indoor installation
• humidity: 20 ~ 90% (non-condensing)
• operating temperature: -10 ~ +55°C
• weight: 230g
• dimensions: 107x65.6x89mm (W/D/H)
• compliance with PN-EN 50131-6 Grade 3 standard
• warranty: 24 months

PSR-ECO-5012-RS is an intelligent AC-DC buffer power supply, which is used in alarm and automation systems. It is based on a modern integrated voltage converter (SMPS-Switch Mode Power Supply). It is devoid of the elements that generate the highest energy losses: isolation transformer, low-voltage rectifier, low-voltage stabilizer. The power supply integrates three functions in one: regulated power supply, battery charger, 12V DC or 24V DC voltage UPS.

GSM ANT-GSM MINI Antenna:

• Operating frequency: 900/1800MHz (dual-band)
• Connector: SMA-m
• Impedance: 50Ω
• Gain: 2dBi max.
• Polarization: vertical
• Base: screwed into connector
• VSWR <1.5
• Dimensions: ø10x52mm
• Warranty: 24 months

AT-GSM-MINI is a mini GSM antenna for mounting in SMA-F connector. The antenna was designed for indoor use. Mounting on system housings.

Antenna connector AT-SMAm-20-SMAf:

• transition from SMA-f to Ropam metal housing
• cable: RG174
• color: black
• length: 200mm
• connectors: socket SMA-f, plug SMA-m
• warranty: 24 months

AT-SMAm-20-SMAf is a 20cm long antenna connector with SMA-m and SMA-f panel connectors, dedicated for transition from SMA-f connector (from PCB board e.g. BasicGSM 2) to metal housing.

Housing for control panels and GSM modules O-R4D:

• Cooperation:
  ♦ BasicGSM/-PS 2
  ♦ MultiGSM/-PS 2
  ♦ NeoGSM-IP/-PS
  ♦ OptimaGSM/-PS
  ♦ NeoGSM-IP-64/-PS
• Application: indoor
• Mounting: surface mounted
• Material: steel sheet, 1mm
• Space for power supply or transformer:
  ♦ PSR-ECO-2012
  ♦ PSR-ECO-5012
  ♦ TRA-30VA/16.5V
• Battery space: 18Ah/12V
• Closure: bolt-on
• Three holes forSMA antenna connectors
• Color: light gray (RAL7035)
• Protection: tamper (opening of the case, detaching from the wall)
• DIN rail (TH35) for mounting PSR-ECO power supply or transformer(interchangeable)
• Snap-on sleeves (pins) mounted from inside the enclosure
• Complies withEN50131 Grade 2 standard
• Dimensions: 325x305x95mm (W/H/D)
• Warranty: 24 months

Ropam O-R4D is a metal surface-mounted enclosure that is designed to mount control panels, modules and components of the leading Ropam brand in various indoor configurations. The enclosure has space for a battery with a maximum capacity of 7Ah/12V or 18Ah/12V. The integrated DIN rail (TH35) allows quick installation of the PSR-ECO-2012, PSR-ECO-5012 power supply unit or TRA-30VA/16.5V transformer. The enclosure is equipped with double tamper protection: against opening the cover and detaching from the wall. The box is closed by bolting. Thanks to its performance in accordance with the PN-EN 50131 Grade 2 standard, the O R4D enclosure is perfect for places exposed to devastation or burglary.

The kit includes:

• Neo-IP-64 control panel ( 1pc).
• AC-DC buffer power supply PSR-ECO-5012-RS ( 1pc).
• O-R4D enclosure ( 1pc).
• Antenna connector AT-SMAm-20-SMAf ( 1pcs).
• GSM antenna ANT-GSM MINI ( 1pcs).
• Accessories (mounting studs, resistors)