CCTV HD-YAP 75-0.59/3.7 + 2x0.75 100mb Cable

The offered HD-YAP 75-0.59/3.7 + 2x0.75 cable allows to professionally realize power supply of CCTV cameras. Generally, cameras powered by 12V DC or 220V AC and are connected to the nearest power outlet, but when there is no such an outlet near the camera, a problem arises.

The optimal solution is to use a special coaxial cable with an additional pair of power wires. The offered cable, in addition to the VIDEO signal, allows you to route power via a special pair of wires (just connect them, for example, to a common power supply in the observation room). Using the offered cable, multiple cameras can be powered from a single power supply.
It is assumed that the video signal can be transmitted via HD-YAP 75-0.59/3.7 + 2x0.75 cable over a distance of about 400 meters without using an amplifier. The HD-YAP 75-0.59/3.7 + 2x0.75 CCTV cable has 2 wires of 0.75 mm² each. The distance over which power can be sent depends on the power consumption of the camera.

HD-YAp RG59+2x0.75 is a 75 Ohm coaxial cable integrated with power wires of figure-eight construction, designed mainly for use in CCTV installations. The coaxial part is a low attenuation RG-59 type cable with an inner conductor of 0.59 mm and a dielectric of physically foamed PE, while the power supply is two multi-strand conductors of 0.75 mm². This allows the cable to be used even at very long distances to the camera . Other versions of this cable are also available. The parameters of HD-YAp RG59+2x0.75 are given in the table below.

Main features:

• choosing one piece you buy 100 meters of cable - the maximum length of one section is 100 meters
• coaxial cable integrated with power wires
• excellent electrical parameters
• internal copper conductor 0.59 mm, power supply wire 2x0.75 mm²
• ability to transmit signal and power over very long distances
• convenience of use and attractive price
• cable construction : one coaxial pair of 75-0.59/3.7 type with wave impedance of 75 Ohm and two multi-stranded conductors of 0.75 mm²
  nominal cross-section with PVC insulation
• cable center : consists of parallel arranged coaxial pair and two control wires
• outer sheath : made of PVC immunized to sunlight embossed in a single operation on the center
• operation range : once laid, the cable is designed for operation in an environment with relative humidity of up to 100% and in
  temperature from -30 to +70 C .

Technical specifications:

Coaxial cable:
Inner conductor:	Ø 0.59 mm Cu Wire
Dielectric:	Ø 3.66 mm PE foamed
Braid:	Extra dense oploy Cu wire
Shielding coefficient:	> 65 dB
Outer sheath:	PVC
Outer diameter:	6 mm
Power cable:
Inner conductors:	2 x 0.75 mm² Cu Wire
Outer sheath:	PVC
Outer diameter:	5.5 mm

Cable attenuation:

Frequency [MHz].	Value[dB/100m]
50	6,5
100	8,4
230	12,8
450	17,7
1000	26,6
1350	30,9
1750	34,9
2150	39,9