Universal electric lock ES16-U24-MB PROFI narrow with memory and lock

Universal electric strike ES16-U24-MB PROFI narrow with memory and interlocking.

The universal electric strike can be installed in both left and right doors. The function of the electric strike is to block the entrance secured with it and to release it after supplying voltage to the coil of the electric strike. The electric strike can be controlled by an intercom system, video intercom system, access control system or a simple push button (so-called "bell"). SCOT electric strikes are manufactured from high-quality materials, which translates into trouble-free operation for a long time. The manufacturer's tests show no excessive wear even with hundreds of thousands of opening cycles. This allows the electric door strike to be covered by a 5-year warranty. It allows eliminating the play between the electro-lock tongue and the door lock tongue by extending the electro-lock tongue within 0 ~ 3 mm from the standard position. The electric strike is equipped with a coil that allows it to be powered by DC (from a DC power supply) or AC (from a transformer). This feature allows the selection of the power supply device, for example, in terms of the audibility of the electric strike. After powering the electric strike with direct current, the person at the entrance will hear only a characteristic "click", while alternating current will cause a "buzz" throughout the time the voltage is applied to the electric strike. The electric strike will work properly if it is supplied with 24V AC or DC voltage. A short (momentary) electrical impulse is sufficient to open (unlock) the lock, which will unlock the electric strike. After passing through the door, the lock will go to the rest position. This is a convenient feature when handling the opening of the door by an outgoing person, where the opening button is at a distance from the lock. without fear of re-locking. It can be used with alarm systems, simple entry control systems, wireless door control systems, etc., where the door opening time is not adjustable. It is not recommended for control by a control system with adjustable opening time, where the set time to apply voltage to the door strike coil may be longer than the time to pass through the door. This will cause the electric strike to unlock again and leave the entrance open. The electric strike has a mechanical interlock switch that can be set to the OPEN or CLOSED position. In the OPEN state, you can pass through the door for any length of time without giving electrical impulses. In the CLOSED state, it works as standard as other electromagnetic lock models. The switch setting is possible only when the door is open. Once the door is closed, changing the switch position is not possible. It is used in places where there is a lot of traffic during the day and there is no need to control the entry of people. Depending on the need, the electromagnetic lock can be switched to the mode of operation with control of admission of persons. Without applying voltage - the electric door strike locked. When voltage is applied, the electric strike is unlocked.

Dimensions:

Technical specifications: