Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Proximity reader Roger MCT66E-IO
- Frequency: 125 kHz
- Autonomous operation: No
Ask about this product show form
Files attached to the product show files
Files for download
-
Size: 0,13 MB
-
Size: 0,33 MB
-
Size: 0,36 MB
Do you represent a budgetary unit?
Check out the deferred payment option.
Product Description
External proximity reader MCT66E-IO
MCT66E-IO is an identification terminal designed for use in the RACS 5 system. The devices, depending on their version, enable recognition of users via proximity cards of EM125kHz (UNIQUE) standard. The terminals have an RS485 interface through which they are connected to the communication bus of the MC16 controller. The devices can be installed outdoors without the need for additional security features.
Main features:
- dedicated to the RACS5 system
- support for EM 125kHz UNIQUE cards (EM4100/4102)
- support for additional PRT series reader
- operation in terminal mode
- power supply: 12V DC
- three NO/NC inputs
- two transistor outputs with load capacity 1A/15V
- one relay output with load capacity 1.5A/30V
- readout range: up to 7 cm
- communication interface: RS485, CLK/DTA
- protection class: IP65
- average current consumption: 40 mA
- three LED indicators
- defining the resting polarity of the output line
- signaling speaker with adjustable sound level
- tamper sensor (Tamper)
- detection of opening the housing and detachment from the ground
- firmware update via RS485
![](galerie/c/czytnik-zblizeniowy-roger-mct_69563.jpg)
Technical specifications:
Power supply voltage | Nominal 12VDC, acceptable 10-15VDC |
Current consumption (average) | 40 mA |
Inputs | Three parametric inputs (IN1..IN3) electrically connected internally to +12V through a 5.6 kΩ resistor. For NO and NC type lines, a trigger threshold of about 3.5V |
Relay outputs | One relay output (REL1) with one NO/NC contact, load capacity 30V/1.5A DC/AC |
Transistor outputs | Two transistor outputs (IO1, IO2) open collector type, load capacity 15V/1A DC |
Tamper protection (TAMPER) | Isolated contacts 50mA/24V, shorted when enclosure closed |
Cards | EM 125 kHz UNIQUE, compatible with EM4100/4102 |
Reading range | Up to 7 cm |
Distances | Up to 1200 m RS485 bus length between controller and reader |
Protection class | IP65 |
Operating temperature | -25°C ~ 60°C |
Humidity | 10% ~ 95% (non-condensing) |
Weight | approx. 150g |
Dimensions (W/H/D) | 85x85x27mm |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Quote form
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Quote form
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote form
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Quote form
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights