ELH-70B9 BRASS Access Control Sign EURA

EURA ELH-70B9 BRASS access control signboard



The Eura "ELH-70B9 brass" access control signboard easily restricts unauthorized access to rooms. The access controller is designed to be installed in both left and right opening doors, and the universal mounting screw spacing of 38~40.5mm in most cases allows the use of a lock already installed in the door. The device is capable of encoding up to 100 proximity cards and 25 digital PIN codes, and is designed for indoor installation.

There is a proximity card reader (RFID) and a numeric keypad on the body of the sign. When the RFID card is brought close to the reader or a code is entered into the keypad, a pulse is given from the access control module, after which a servomotor unlocks the mechanical gear, allowing the door to be opened by pressing the handle on the outdoor sign normally. The waiting period for pressing the handle is set at the factory for a period of about 5 seconds, after which time the gearbox is again blocked and the lock goes into a state of waiting for the next pulse.

From the inside of the premises, it is always possible to open the door by simply pressing the handle. When the open door is closed, the latch mechanism is immediately triggered, making it impossible to open the door from the outside without approaching the card or entering the code. In the event of a battery drain or malfunction, it is possible to open the lock using an ordinary mechanical key, 2 pieces of which are included in each set.

The Eura "ELH-70B9 brass" access control signboard is powered by 4 alkaline 1.5V AA type batteries and can operate for about 1 year on a single set of batteries. Color version of the lock signboard: antique brass

Technical Specifications :

Power supply voltage	6 V DC
Power supply type	Alkaline batteries (4 x AA 1.5V)
Current consumption - standby / operation	16 μA / 72 mA
Permissible relative humidity	<80%
Door intended use	Left / right
Housing material	Zinc alloy
Duration of release pulse	Approximately 5 sec.
Recommended place of installation	Indoors
Built-in memory	100 cards + 25 codes
Proximity reader	Yes
Reader type	Unique 125 kHz
Cipher	Yes
Fingerprint reader	No
Operating temperature range	-10ºC ~ +45ºC
Protection factor	IP20
Dimensions of the external signboard (W x SZ x G)	154 x 74 x 77 mm
Dimensions of the inner sign (H x W x D)	152 x 76 x 70 mm
Net weight	1670 g