Video intercom VTO2311R-WP Wi-Fi / IP Dahua

Main features:

• Single-subscriber gateway system
• Sensor: 1/2.8" 2MP HD CMOS
• Lens: 2.2mm - viewing angle approx. 110° (H) / 62° (V)
• Night illumination: IR LEDs
• The door station supports only 1 door, no additional DEE1010B module can be installed.
• Call: 1 mechanical button with LED backlighting
• Transponder reader: Mifare 13.56MHz (3000 cards)
• Communication interface: 1x RJ45 Ethernet 10/100Mbps
• Interface: 1x electric lock (relay NO/NC), 1x exit button, 1x status indication (reed switch)
• Built-in Wi-Fi 802.11b/g/n (2.4GHz)- up to 30m
• Support for microSD / microSDHC / microSDXC card up to 256GB
• Ability to work in standalone mode (without a monitor)- operation from a mobile device
• Automatic taking of pictures of callers (VTH monitor with memory card required)
• Compatible: TCP/IP, SIP, Onvif, CGI, RTSP, P2P
• Voice messages in Polish for easy operation
• Audio-video message recording (VTH monitor with memory card required)
• Processing speed and resolution:
  ♦ 25/30 fps for 1920x1080 (2Mpx) - auxiliary stream
  ♦ 25/30 fps for 1280x720 (720p)
• Video bitrate: 768Kbps ~ 8Mbps (2MP)
• Mounting: surface mounted (canopy box included)
• Management and configuration:
  ♦ ConfigTool, Smart PSS Lite, DSS Express
  ♦ web browsers: IE (Web Service 2.0)
  ♦ mobile devices: iOS, Android (DMSS)
• Housing: plastic, waterproof class (IP65 "you should powericon the gap between the device and the mounting surface ")
• Power supply: DC 12V ~ 33V or PoE 48V(802.3af)
• Dimensions: 50x30x160m

VTO2311R-WP is a very slim VTO Pro Series door station from Dahua, allowing it to work in Dahua IP SIP Protocol systems. The panel was designed for the construction of simple IP video door entry systems (Villa). The presented VTO2311R-WP door panel is equipped with a 2Mpx (Full HD 1080p) camera with 2.2mm lens and automatic IR illumination, a two-way audio system with noise and echo cancellation and a call button. The device has a relay output (NC/NO) for lock control, the ability to connect an exit button and a reed switch.

Technical specifications: