Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Surge protector AXON-VIDEO-TWIST
Do you represent a budgetary unit?
Check out the deferred payment option.
Product Description
Main features:
- Standard: AHD - 720p/ HD-CVI - 720p/ HD-TVI - 720p/ CVBS - PAL / NTSC
- Rated voltage: 6 V
- Maximum voltage: 10 V
- Nominal discharge current (line-to-line) [C3]:25 A - 10/1000 µs
- Nominal discharge current (line-to-ground) [C2]:5 kA - 8/20 µs
- Up line-to-line protection voltage for znamin current [C3]:≤ 16 V - 1 kV/µs
- Line-to-ground protection voltage [C2]:≤ 1000 V - 1.2 kV / 50 µs
- Connectors: 2x triple screw terminal detachable, 1.5 mm², 3.5 mm spacing
- Protection parameters: Complies with PN-EN61643-21
AXON-VIDEO-TWIST is designed for surge protection of analog cameras and DVRs in CCTV systems using, twisted pair cable for video signal transmission. The device is an extended protection element containing a two-stage protection. The first stage uses high-current gas elements, limits overvoltages occurring between the transmission line and PE, and discharges the interference charge to ground. The second stage contains high-speed semiconductor elements that eliminate overvoltages that may occur between wires in the transmission line. AXON-VIDEO-TWIST has a metal, shielding housing As connecting elements, detachable terminal connectors are used The "100 Ω" terminals are used to connect the signal pair of twisted-pair cables, while the third terminal can be used, if necessary, by the installer as ground or shield continuation for FTP cables The secondary terminal is not connected to ground at the factory The ground wire, terminated with a fork tip, is brought outside and connects directly to the housing. The device is an unbalanced protector. The transmission line is connected to the "Line" terminals, while the protected device is connected to the "Device" connector. It should also be remembered that the condition for proper operation of the protector is to connect it to a working ground or PE wire
Technical specifications:
Standard: |
|
Voltage Rating: | 6 V |
Maximum voltage: | 10 V |
Nominal discharge current (line-to-line) [C3]: | 25 A - 10/1000 µs |
Nominal discharge current (line-to-ground) [C2]: | 5 kA - 8/20 µs |
Up line-to-line protection voltage for znamin current [C3]: | ≤ 16 V - 1 kV/µs |
Line-to-ground protection voltage [C2]: | ≤ 1000 V - 1.2 kV / 50 µs |
Line series impedance: | ≤ 2 Ω |
Frequency response: | 0 MHz ... 30 MHz |
Connectors: | 2x triple screw terminal detachable, 1.5 mm², 3.5 mm spacing |
Protection parameters: | Complies with PN-EN61643-21 |
Housing: | Metal, black |
Weight: | 0.07 kg |
Dimensions: | 69 x 32 x 20 mm |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights