Teltonika RUTX50 | Professional industrial router | 5G, Wi-Fi 5, Dual SIM, 5x RJ45 1000Mb/s
Photo gallery
Product Description
Industrial 5G router from Teltonika Networks
Teltonika's RUTX50 is a future-proof, multi-network industrial router that offers 5G mobile communications for high-speed, data-intensive applications. The RUTX50 is equipped with 5 Gigabit Ethernet ports, WiFi, Dual-SIM, GPS, a powerful processor and RutOS software for advanced networking solutions.
Key features of the Teltonika RUTX50
- Extremely high 5G mobile network speeds of up to 3.3 Gbps
- SA and NSA - supports both architectures to leverage 5G infrastructure
- Ultra-low latency - single-digit latency for mission-critical applications
- Dual SIM - uninterrupted communications with automatic failover
- Wi-Fi 5 - dual-band data throughput for up to 150 simultaneous clients
- Backward compatible with 4G (LTE CAT 20) and 3G network technologies
Support for 5G, Dual SIM and 5 Gigabit ports
5G dual SIM cellular communications combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enable reliable data transfer with ultra-low latency. The power of 5G technology combined with a wide range of interfaces and industrial hardware features ensures adaptability for future upgrades and expansions
RutOS system and remote RMS management
The RUTX50 comes with RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is compatible with Remote Management System (RMS), which provides optimized remote management and monitoring capabilities for large fleets of devices .
Package contents
- RUTX50 router
- 18 W power supply
- 4 x mobile antennas (swivel, male SMA)
- 2 x WiFi antennas (magnetic mount, male RP-SMA, 1.5 m cable)
- 1 x GNSS antenna (adhesive, male SMA, 3 m cable)
- Ethernet cable (1.5 m)
- SIM adapter
- QSG (quick start guide)
- Box
Technical specifications:
| Mobile network | |
| Mobile module | 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) - LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G - 42 Mbps DL, 5.76Mbps UL |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, combined bandwidth, IMSI, ICCID |
| SMS/Call | SMS status, SMS configuration, SMS send/read via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-response, call tools |
| USSD | Supports sending and reading unstructured ancillary service data messages |
| Black/white list | Black/white list of operators |
| Bandwidth management | Bandwidth blocking, displaying status of used bandwidth |
| APN | Auto APN |
| Bridge mode | Direct connection (bridge) between a mobile ISP and a device on the LAN |
| Passthrough | The gateway assigns its mobile WAN IP address to another device on the LAN |
| Multiple PDNs | Ability to use different PDNs for multiple network accesses and services |
| Wireless networks | |
| Wireless mode | 802.11b/g/n/ac Wave 2 (WiFi 5) with data rates up to 867 Mbps (Dual Band, MU-MIMO), fast transition 802.11r, access point (AP), station (STA) |
| Wi-Fi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| ESSID | ESSID stealth mode |
| Wi-Fi users | Up to 150 simultaneous connections |
| Wireless access point | Captive portal (Hotspot), internal/external Radius server, built-in configurable landing page |
| Wireless mesh/roaming | Wireless mesh (802.11s), fast roaming (802.11r) |
| Ethernet | |
| WAN | 1x WAN (can be configured for LAN) 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards, supports Auto MDI/MDIX |
| LAN | 4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover |
| Networking | |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) |
| Routing | Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP). |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forwarding, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation |
| DDNS | Supported >25 service providers, others can be configured manually |
| SSHFS | Ability to mount a remote file system via SSH protocol |
| Security | |
| Authentication | Shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via Web.UI, unlimited firewall configuration via CLI, NAT, NAT-T |
| Attack prevention | DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | VLAN separation based on ports and tags |
| Mobile limit control | Set custom data limits for SIM card |
| WEB filter | Black list to block unwanted websites, white list to determine allowed sites |
| Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filters |
| VPN | |
| OpenVPN | Ability to run multiple clients and server simultaneously, 12 encryption methods |
| OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| GRE | GRE tunnel |
| IPsec | IKEv1, IKEv2, supports up to 5 x IPsec VPN tunnels (instances) with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| SSTP | SSTP client instance support |
| STUNNEL | Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code |
| DMVPN | A method for building scalable IPsec VPNs |
| PPTP, L2TP | Client/server services can run simultaneously, L2TPv3 support |
| WireGuard | WireGuard VPN client and server support |
| ZeroTier | ZeroTier VPN |
| Modbus TCP Slave | |
| ID filtering | Reply to one ID in the range [1;255] or any ID |
| Allow remote access | Allow access over WAN |
| Custom registers | Custom MODBUS TCP register block that allows read/write to a file inside the router and can be used to extend the functionality of MODBUS TCP slave |
| Modbus TCP master | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| MQTT Gateway | |
| Gateway | Enables sending commands and receiving data from MODBUS Master via MQTT broker. |
| DNP3 | |
| Supported modes | TCP Master, DNP3 Outstation |
| Data to Server | |
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
| IoT platforms | |
| Cloud of things | Enables monitoring of: Device data, Mobile data, Network information, Availability |
| ThingWorx | Allows monitoring: WAN type, WAN IP Mobile carrier name, Mobile signal strength, Mobile network type |
| Cumulocity | Allows you to monitor: Device model, revision and serial number, Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP |
| Azure IoT Hub | Can send device IP, number of bytes sent/received/ 3G connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type, temperature, PIN number to Azure IoT Hub server |
| Monitoring and management | |
| Web.UI | HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting, event log, system log, kernel log |
| FOTA | Remote firmware update from server, automatic notifications |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
| Call | Restart, status, mobile data on/off, output on/off |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| JSON-RPC | API management via HTTP/HTTPS |
| MODBUS | MODBUS TCP status/control |
| RMS | Teltonika Remote Management System (RMS) - remote management system for Teltonika devices |
| System parameters | |
| CPU | Quad-core ARM Cortex A7, 717 MHz |
| RAM | 256 MB (100 MB available for user space) |
| Flash memory | 256 MB (80 MB available for user space) |
| Software/configuration | |
| Web.UI | Software update from file, software check on server, configuration profiles, configuration backup |
| FOTA | Software upgrade |
| RMS | Update software/configuration for multiple devices |
| Keep settings | Update software without losing current configuration |
| Software customization | |
| Operating system | RutOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++ |
| Development tools | SDK package with build environment provided |
| Location tracking | |
| GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
| NMEA | NMEA 0183 |
| Server software | Supported server software TAVL, RMS |
| Geofencing | Configurable multiple geofence zones |
| USB | |
| USB standard | USB 2.0 |
| Applications | Samba sharing, USB serial, Modbus gateway |
| External devices | Ability to connect external hard drive, flash memory, additional modem, printer |
| Storage formats | FAT, FAT32, NTFS |
| Inputs/outputs | |
| Inputs | 1 x digital input, 0-6 V detected as logic low state, 8-30 V detected as logic high state |
| Outputs | 1 x digital output, open collector output, max output 30 V, 300 mA |
| Event handling | SMS, Email, RMS |
| I/O juggler | Allows you to set certain I/O conditions to initiate an event |
| Connector | 4-pin industrial DC power connector |
| Input voltage range | 9 - 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
| PoE (passive) | Mode B, LAN1 Port, 9 - 50 VDC |
| Power consumption | Idle: <4 W, Max: <18 W |
| Physical interfaces (ports, LED, antennas, buttons, SIM) | |
| Ethernet | 5x RJ-45, 10/100/1000 Mbps |
| I/O | 1 x digital input, 1 x digital output on 4-pin power connector |
| LEDs | 3 connection status LEDs, 3 connection strength LEDs, 10 Ethernet port status LEDs, 4 WAN status LEDs, 1 power LED, 2 2.4G and 5G WiFi LEDs |
| SIM | 2 x SIM slot (Mini SIM - 2FF), 1.8V/3V |
| Power supply | 1 x 4-pin DC power connector |
| Antennas | 4 x SMA for mobile devices 2 x RP-SMA for WiFi 1 x SMA for GNSS |
| USB | 1 x USB A port for external devices |
| Reset | Reboot button/restore user default settings/restore factory settings |
| Other | 1 x grounding screw |
| Physical Features | |
| Housing material | Aluminum housing |
| Dimensions | 132 x 44.2 x 95.1 mm |
| Weight | 533 g |
| Mounting options | DIN rail (can be mounted on two sides), placement on a flat surface |
| Operating environment | |
| Ambient temperature range during operation | -40 °C to 75 °C |
| Ambient humidity during operation | 10% to 90%, non-condensing |
| Protection class | IP30 |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Quote form
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Quote form
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote form
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Quote form
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights