Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Ropam NEOLTE-IP-SET Alarm Control Panel
Do you represent a budgetary unit?
Check out the deferred payment option.
Product Description
Main features:
|
|
ROPAM's NeoLTE-IP-SET, which includes the NeoLTE-IP control panel, supported by the PSR-ECO-2012 buffer power supply, AT-GSM-MINI90 antenna and O-R3P enclosure, is a perfect combination of alarm system and home automation, using GSM / LTE and WIFI connectivity. Its modern design and advanced technology blend perfectly with a variety of spaces and interiors.
Software:Programming and configuration of the system is done using dedicated software NeoGSM-IP Manager. This is an intuitive-to-use application that allows configuration of the entire system including expansion modules. Programming from a computer requires physical connection to the control panel, which is made via a microUSB port. DOWNLOAD LINK. |
Ropam has prepared RopamNeo software for managing an alarm system based on the NeoLTE-IP control panel. Remote connection of the application with the control panel via LTE / GPRS or the Internet (dynamic IP address) is possible through the RopamBridge server.
Technical specifications of NEOLTE-IP:
Power supply voltage | U = 9V ~ 14V/DC min/max @ 1.5A min (PSR-ECO-5012-RS/2012 power supply required) |
DC power supply failure indication | U<11V |
Load capacity of controlled outputs: O1, O2 and power supply AUX, KBD | In = 1.0A (continuous), Ipeak = 1.3A (momentary) |
Short-circuit and thermal protection of outputs: O1, O2, AUX, KBD | Ilim = 1.0A ~ 1.7A, Tj, Tc= 125 °C (condition: short-circuit current limitation or output overload) |
Load control for outputs: O1, O2 | 2KΩ max. line impedance |
Load capacity of outputs O3-O8 | 700mA @30Vdc |
Current consumption of control panel systems (without outputs) | 300/95/70 - max/average |
Wifi off, GSM off, Eth | -15mA, -10mA, +30mA |
LTE modem | Supports 4G and 2G networks, (LTE-FDD: B1/B3/B5/B7/B8/B20/B28) |
GSM operating frequency of the modem | 850 / 900 / 1800 / 1900 MHz |
WIFI module | In 802.11 b/g/n, 2.4 GHz, with built-in PCB antenna on the case |
Type of data transmission | SMS, VOICE, GPRS |
Audio signal: AUDIO IN, AUDIO OUT (VSR connector) | 2 Vrms |
Binary inputs (programmable) | NO, NC, EOL, 2EOL/NC, 2EOL/NO = hi-Z/~30Ω, ~30Ω/hi-Z, hi-Z/2k2, 1k1/2k2, 2k2/1k1 line impedance for type: no violation / violation |
Temperature sensor inputs. | T1 - T2 (Data), GND, +VT (3.3V) |
Analog input (programmable) | Uin = 0 - 10V / DC (max.) (impedance Z = 30KΏ , resolution 10mV, accuracy 1% of the whole range) |
System communication | Mag |
Technical specification PSR-ECO-2012:
Supply voltage and current | Uin = 195V ~ 265V/AC 50Hz, Irms = 0.25A max. |
Inrush current of the power supply | 11A@2ms - no load |
Output voltage of the power supply | Uout = 13.8VDC +0.5V/-1V when no ACU Un = 13.8VDC (@20°C, Iout=0A) Uout = 9.5VDC to 14.3V when ACU connected |
DC voltage ripple voltage | 100mV p-p max |
Charge voltage auto-compensation parameter | -3 [mV/°C/cell] +/- 20% above Design Temperature 20 °C +3 [mV/°C/cell] +/- 20% below Design Temperature 20 °C |
Power supply output power (current capacity) | 20W (1.5A max.) |
Total power of the power supply | 25W |
Energy efficiency | 88% ~ 91% |
No-load energy consumption from ~230V mains (Iout=0, Ibat=0) | 0.39W (S = 3.5VA) |
AC power failure indication | Technical output ACok |
DC low voltage failure signaling | Uout min +1V (+/-5%) |
Discharged battery cut-off voltage Uout min | Uout<10V without load Uout <10.4V@Iout 1.5A |
Output load capacity +V, GND | In = 1.5A (continuous) Ipeak = 2A (momentary) |
Short-circuit protection of the boost converter | Ilim = 1.8A (+/-5%), (condition: short-circuit current limit or output overload) |
Short-circuit protection, thermal output protection: +BAT | PTC 1.85A |
Load capacity of outputs FBAT, ACok | FBAT: 100mA@30Vdc max (no short circuit protection) ACok: 5mA@12VDC |
Output type: FAC, FBAT | OC (Open Collector, open collector)</td |
O-R3P Technical Specifications:
Control panels and modules | Ropam |
Tamper protection | Ropam tamper - anti-sabotage microswitch |
Tamper | Opening, meets the requirements of the PN-EN 50131 standard |
Application | Indoors |
Design | ABS plastic Grilles included |
Color | RAL 7035 (light grey) |
Closing | Screwed x4 from the front of the case |
Space for battery | 7Ah/12 Lead-acid dry (SLA) |
DIN rail (TH35) | For mounting PSR-ECO power supply unit |
GSM, WIFI antenna mounting inside the enclosure | Yes |
Dimensions (W/H/D) | External enclosures: 264x253x85 [+/-2mm]. |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights