Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Kidde K7DCO carbon monoxide and carbon dioxide detector
Photo gallery
-
Manufacturer
-
Product Code
K7DCO
-
Warranty
10 lat
- Sensor type: Carbon Monoxide
Ask about this product show form
Files attached to the product show files
Files for download
-
Size: 0,03 MB
-
Size: 0,57 MB
-
Size: 0,33 MB
-
Size: 0,47 MB
-
Size: 0,10 MB
Product Description
Kidde KID-K7DCO Carbon Monoxide Charge Detector
The K7DCO carbon monoxide detector with display is equipped with a Kidde electrochemical sensor, guaranteeing a 10-year service life. Battery power supply allows the detector to be mounted in an optimal place in the room and also provides protection in the event of a power outage.
The built-in LCD display shows the carbon monoxide concentration level from 0 to 999 PPM. CO concentration measurements are taken every second. Exceeding the permissible level of CO is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB).
The sensor has a test / reset button for checking the operation of the device and resetting the alarm signaling, as well as a button when pressed, which displays the highest detected CO level stored in the sensor's memory. The sensor also has a function that informs about the activation of the alarm in the last 14 days. This allows the user to make sure that carbon monoxide has not been emitted in the room during his absence.
The performance monitoring system continuously monitors, among other things: the sensor, internal circuits and battery status. In the event of abnormal operation or low battery, the yellow LED light flashes, the LCD panel displays the relevant graphic information, and a warning beep sounds. In addition, the sensor is equipped with a simulation test function to quickly check the correct response of the sensor to the CO test gas.
Thanks to its special shock-resistant design, the detector has been approved for use not only in houses and apartments, but also in caravans, campers and boats. After 10 years of power activation, the detector will remind you to replace the device.
Main features:
- Electrochemical technology - one of the world's most precise electrochemical sensors
- LCD display with a maximum indication of 999 PPM
- 40% longer service life compared to other sensors available on the market
- Loud alarm signaling
- Test/Reset button - for checking and operating the device
- Peak concentration button - for reading the highest detected CO concentration stored in memory
- Battery power supply for protection also in case of power failure
- Possibility of wall mounting or placing the sensor on a flat surface
- Indication of abnormal operation and end of operating period
- Low power supply voltage indication
- Additional LED signaling abnormal operation and end of operating period
- Function informing about alarm activation within the last 14 days
- Simple installation and operation
- Certified for use in homes and in caravans, campers and boats
- Small size, low weight, aesthetic and durable housing
- Very low operating cost
- B construction mark
- National Certificate of Permanent Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021
- BSI certificate confirming compliance with BS EN 50291-1:2018
- BSI Certificate confirming compliance with BS EN 50291-2:2019
- 10-year warranty
10 YEAR WARRANTY
PROVEN QUALITY
The K10LLDCO is marked with the B construction mark, confirming that it meets the requirements of the Polish standard PN-EN 50291-1:2018+AC:2021 for home carbon monoxide detectors. The tests were performed by the Scientific and Research Center for Fire Protection - Józef Tuliszkowski National Research Institute (CNBOP-PIB). In addition, it has a BSI certificate confirming compliance with the requirements of BS EN 50291-1:2018 issued by the British Standards Institution.
Technical specification:
| PRODUCT INFORMATION | |
| Sensor | KIDDE's patented electrochemical CO sensor |
| Detected gases | Chad (carbon monoxide - CO) |
| Alarm signaling | Optical - built-in red LED, the screen displays CO concentration in the range of 0 ~ 999 PPM Acoustic - siren with a sound intensity of about 85 dB at a distance of 3 m, 3.0 ~ 3.5 KHz |
| End-of-life signaling | Optical - yellow LED flashes twice every 60 seconds, "End" is displayed on the screen Acoustic - double short beep every 60 seconds |
| Malfunction signaling | Short beep every 30 seconds and yellow LED flashes every 30 seconds or continuous beep, "Err" is displayed on the screen |
| Alarm activation memory | Red LED flashes every 60 seconds if the unit has detected a CO concentration of 100 ppm or more in the last 14 days |
| Test/Reset button | For control and operation of the device When the button is pressed, the device performs a control test For clearing the alarm activation indication stored in the device memory In case of alarm activation, it allows resetting the device |
| Peak concentration button | When the button is pressed, the highest detected CO concentration stored in the sensor memory in the range of 11 ~ 999 PPM is displayed |
| Sensor life span | 10 years |
| Display | LCD panel - display in the range of 0 ~ 999 PPM |
| Mounting method | On the wall or as a free-standing unit, on a flat surface |
| Housing | Made of ABS plastic |
| Additional features | Simulation test - allows you to test the sensor using commercially available CO test gas. |
| Additionally included | Batteries, mounting bracket, mounting studs, instruction manual in Polish. |
| POWER SUPPLY | |
| Power source | 2 x 1.5V alkaline batteries type AA (included) |
| Low battery indication | Short beep and flashing yellow LED every 60 seconds, "Lb" is displayed on the screen. |
| WORKING AND STORAGE CONDITIONS | |
| Operating conditions | Temperature: -10 ~ 45°C Humidity: up to 90% RH, non-condensing |
| Storage conditions | Temperature: -20 ~ 60°C Humidity: 5 ~ 95% RH, non-condensing |
| QUALITY AND SAFETY | |
| Certifications and approvals | Construction mark B National Certificate of Permanent Performance confirming compliance with Polish standard PN-EN 50291-1:2018+AC:2021 BS EN 50291-1:2018Certifying body BSI KM 738897 BS EN 50291-2:2019Certifying body BSI KM 738897 CE |
| Warranty | 10 years |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Quote form
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Quote form
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote form
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Quote form
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights