Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Proximity reader Roger MCT12E-BK-IO
Photo gallery
-
Manufacturer
-
Product Code
MCT12E-BK-IO
-
Warranty
36 miesięcy
- Frequency: 125 kHz
- Autonomous operation: No
Ask about this product show form
Files attached to the product show files
Files for download
-
Size: 0,10 MB
-
Size: 0,85 MB
-
Size: 0,30 MB
Related products
Product Description
Roger proximity reader MCT12E-BK-IO
MCT12E-BK-IO is an identification terminal designed for use in the RACS 5 system. The device enables recognition of users via proximity cards of EM125kHz (UNIQUE) standard. The MCT12E-BK-IO terminal has an RS485 interface through which it is connected to the communication bus of the MC16 controller. The device can be installed outdoors without the need for additional security, and allows the operation of an additional PRT series reader. The MCT12EBKIO terminal is equipped with three NO/NC inputs, two transistor outputs, one relay output.
Key features:
- dedicated to RACS5 system
- support for additional PRT series reader
- support for EM 125kHz UNIQUE cards (EM4100/4102)
- operation in terminal mode
- power supply: 12V DC
- read range: up to 7 cm
- communication interface: RS485, RACS CLK/DTA
- waterproof class: IP65
- average current consumption: 50 mA
- three LED indicators
- signaling speaker with adjustable sound level
- tamper sensor (Tamper)
- three NO/NC inputs
- two transistor outputs with load capacity 1A/15V
- one relay output with load capacity 1.5A/30V
Technical specifications:
| Supply voltage | Nominal 12VDC, permissible 10-15VDC |
| Current consumption (average) | approx. 40 mA |
| Inputs | Three parametric inputs (IN1..IN3) electrically connected internally to +12V through a 5.6 kΩ resistor. For NO and NC type lines, a trigger threshold of about 3.5V |
| Relay outputs | One relay output (REL1) with one NO/NC contact, load capacity 30V/1.5A DC/AC |
| Transistor outputs | Two transistor outputs (IO1, IO2) open collector type, load capacity 15V/1A DC |
| Tamper protection (TAMPER) | Isolated contacts 50mA/24V, shorted when enclosure closed |
| Cards | EM 125 kHz UNIQUE, compatible with EM4100/4102 |
| Reading range | Up to 7 cm |
| Distances | Up to 1200 m RS485 bus length between controller and reader |
| Protection class | IP65 |
| Operating temperature | -25°C ~ +60°C |
| Humidity | 10% ~ 95% |
| Weight | approx. 150g |
| Dimensions (width/height/length). | Standard stand: 46x152.5x23 Thicker stand: 46x152.5x35mm |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Quote form
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Quote form
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote form
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Quote form
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights