Access control set with voltage hold PRT12EM-G proximity

Access control set with voltage backup PRT12EM-G

Access control kit with keypad. The set is ready to connect. In the event of a power outage, the buffer power supply with battery guarantees proper uninterrupted system operation.

Roger PRT12EM-G Proximity Reader

The PRT12EM-G proximity reader can operate in terminal or standalone mode, and can be used as a proximity terminal connected to a master access controller or be configured for standalone operation as a simple access controller. The device can be configured, for many popular transmission formats, which in practice makes them compatible with most access controllers available on the market. The PRT12EM-G reader has been designed for use in access control systems based on EM 125 KHz standard proximity tags. The PRT12EM-G has a built-in keypad. In terminal mode, the reader operates as a slave device to the access controller and its role is limited to reading the card number and sending the read data to the access controller.

Scot BT-4N surface-mounted illuminated exit button

Scot BT-4N metal door release button with button illumination.

Main features:

• NO contact
• Load capacity: 3A at 36V DC
• Power supply for the LED: 12V DC
• Dimensions: 32 x 83 x 25mm (surface mounting, 12mm hole required)

13.8V/2A/7AH PULSAR buffer power supply HPSB-12V2A-B

HPSB-12V2A-B - impulse buffer power supply, is designed for uninterrupted supply to devices requiring stabilized voltage of 12 V DC (±15%). In case of mains voltage decay, there is an immediate switch to battery power supply. The power supply has been constructed on the basis of high energy efficiency switching power supply modules and are housed in metal enclosures (color RAL 9003) with space for battery(s). The enclosures are equipped with a microswitch indicating the opening of the door (tamper). The device should be installed indoors according to environmental class II, with normal humidity (RH=90% max. without condensation) and temperature from -10°C to +40°C.

Main features of the HPSB-12V2A-B power supply:

• power supply voltage ~200 - 240 V
• uninterruptible DC power supply 13.8 V; 27.6 V or 54 V
• available versions with space for batteries from 7 Ah to 65 Ah
• high efficiency (up to 90%)
• battery charging and maintenance control
• optical LED signaling
• battery protection against over-discharge (UVP)
• battery output protection against short-circuit and reverse connection

Gel battery 12V 7.2Ah

The 12V 7.2Ah battery is dedicated for buffer power supplies used in security systems (CCTV, KD, SSWiN). The battery is made in AGM (Absorbed Glass Mat) technology and has the electrolyte absorbed in the glass fiber separators with high porosity, located between the plates. A maintenance-free battery, it does not require water refilling and constant maintenance of the electrolyte. This type of battery can also be used as a power source in portable devices.

Electric door strike with memory R-3 834

The Z-834 electric strike is used for remote opening of doors, wickets (left, right and double-leaf). Z-834 is characterized by an adjustable tongue. The latch is made of aluminum and is additionally powder coated. They are made of corrosion-resistant materials, so they can be installed outdoors, however, they should be protected from flooding, weathering and painting. The catches can work with intercom systems in the entrance doors of multi-family buildings. The electromagnetic striker is designed for doors and wickets made of metal sections, to work with a latch or latch lock. The electric strike has memory and internal regulation. The catch without voltage is in the closed state, when voltage is applied it goes into the open state and remains in this state until the "door" is closed.

The latch can work with an intercom system in the front door. The lock is made of corrosion-resistant materials, so it can be installed outdoors, but it should be protected from flooding, paint and adverse weather conditions. The electric strike has an adjustable tongue. The catch without voltage is in the closed state, when voltage is applied it goes into the open state and remains in this state until the "door" is closed.

Flat signboard for electric door strike short 901G.

Set includes:

• Roger PRT12EM-G Proximity Reader - 1 pc.
• Surface-mounted exit button illuminated Scot BT-4N - 1 pc.
• 13.8V/2A/7AH PULSAR HPSB-12V2A-B buffer power supply - 1 pc.
• Gel battery 12V 7.2Ah - 1 pc.
• Electric strike with memory R-3 834 - 1 item.
• Flat plate sign for electric door strike short 901G. - 1 pcs.
• RFID proximity key fob ATLO-504/G - 5 pcs.