Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Hotel access terminal MCT82M-IO-HR-F
-
Manufacturer
-
Product Code
MCT82M-IO-HR-F
-
Warranty
36 miesięcy
- Application: Interior
- Frequency: 13.56 MHz
- Autonomous operation: No
Ask about this product show form
Files attached to the product show files
Files for download
-
Size: 0,13 MB
-
Size: 1,18 MB
-
Size: 0,17 MB
Do you represent a budgetary unit?
Check out the deferred payment option.
Related products
Product Description
MCT82M-IO-HR-F hotel access terminal
Using the MCT82M-IO-HR corridor access terminal and a card pocket terminal (e.g., MCT82M-IO-CH or MCT86M-IO-CH-HR), a basic set of devices can be obtained within the RACS 5 system to realize typical access control and automation requirements in hotel rooms. Using the Integration Server, it is possible to integrate the RACS 5 system with third-party programs and even realize additional operating logic not available in the system.
Main features:
- MIFARE Ultralight/Classic/Plus/DESFire reader.
- Touch-sensitive call button
- 4 LED status indicators
- 3 EOL input lines
- 2 150 mA transistor outputs
- 1.5 A relay output
- loudspeaker with adjustable sound level
- dimming of LED indicators in standby state
- communication with the controller via RS485 interface
- power supply 12 VDC
- tamper sensor
- operation in indoor conditions
- QUADRUS design line
- dimensions of flush-mounted version: 105.0 x 105.0 x 31.5 mm (H x W x Th)
- dimensions of surface-mounted version: 85.0 x 85.0 x 21.5 mm (H x W x Th)
Technical specifications:
Supply voltage | Nominal 12VDC, acceptable 10-15VDC |
Current consumption (average) | 60 mA |
Inputs | Three parametric inputs (IN1 - IN3) electrically connected internally to +12V through a 5.6 kΩ resistor. For NO and NC type lines, a trigger threshold of about 3.5V |
Relay outputs | One relay output (REL1) with one NO/NC contact, load capacity 30V/1.5A DC/AC |
Transistor outputs | Two transistor outputs (IO1, IO2) open collector type, load capacity 15V/150mA DC |
Tamper protection (TAMPER) | Enclosure opening reported by software method to access controller |
Cards | 13.56MHz MIFARE Ultralight, Classic, DESFire EV1 and Plus |
Reading range | Up to 7 cm for MIFARE Ultralight, Classic cards Up to 4 cm for MIFARE DESFire EV1, Plus cards |
Distances | Up to 1200 m RS485 bus length between controller and reader |
Protection class | IP41 |
Operating temperature | -10°C ~ 50°C |
Humidity | 10% ~ 95% (non-condensing) |
Weight | approx. 100g |
Dimensions (W/H/D) | Surface-mounted: Standard stand: 85x85x22mm Thicker stand: 105x105x31mm |
Powiadom o dostępności
Jeśli produkt którego szukasz nie jest obecnie dostępny, wpisz swój adres e-mail. Jak tylko się pojawi na stanie, od razu zostaniesz o tym poinformowany
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights