Not sure if the devices you have chosen are suitable? Click here and fill out the form, and our advisor will prepare an offer tailored to your requirements.
Proximity reader Roger MCT82M-BK-IO
Photo gallery
-
Manufacturer
-
Product Code
MCT82M-BK-IO
-
Warranty
36 miesięcy
- Application: Interior
- Frequency: 13.56 MHz
- Autonomous operation: No
Ask about this product show form
Files attached to the product show files
Files for download
-
Size: 0,13 MB
-
Size: 1,30 MB
-
Size: 0,17 MB
-
Size: 0,40 MB
Related products
Product Description
MCT82M-BK indoor proximity reader
MCT82M-BK-IO is an identification terminal designed for use in RACS 5 system. The device enables user recognition via 13.56 MHz MIFARE Ultralight/Classic standard proximity cards. The MCT82M-BK-IO terminal has an RS485 interface through which it is connected to the communication bus of the MC16 controller. The device can be installed outdoors without additional protection. The MCT82MBKIO terminal is equipped with three NO/NC inputs, two transistor outputs, one relay output.
Main features:
- dedicated to RACS5 system
- support for 13.56 MHz MIFARE Ultralight/Classic cards
- terminal mode operation
- power supply: 12V DC
- read range: up to 7 cm
- communication interface: RS485
- protection class: IP41
- recognition of long card application
- average current consumption: 65 mA
- number reading: CSN, SSN, MSN
- reading of programmable card number: PCN
- signaling speaker with adjustable sound level
- three LED indicators
- tamper sensor (Tamper)
- detection of opening the case and detachment from the ground
- firmware update via RS485
- configuration via RS485 (RogerVDM)
- three parametric inputs of NO/NC type
- two transistor outputs with load capacity of 150mA/15V
- one relay output with 1.5A/30V load capacity
- possibility of inputs operation in Double Wiring mode
- input response time defined in the range: 50 ~ 5000 ms
- defining rest polarization of output line
Technical specifications:
| Supply voltage | Nominal 12VDC, acceptable 10-15VDC |
| Current consumption (average) | 45 mA |
| Inputs | Three parametric inputs (IN1..IN3) electrically connected internally to +12V through a 5.6 kΩ resistor. For NO and NC type lines, a trigger threshold of about 3.5V |
| Relay outputs | One relay output (REL1) with one NO/NC contact, load capacity 30V/1.5A DC/AC |
| Transistor outputs | Two transistor outputs (IO1, IO2) open collector type, load capacity 15V/150mA DC |
| Tamper protection (TAMPER) | Enclosure opening reported by software method to access controller |
| Cards | 13.56MHz MIFARE Ultralight, Classic |
| Reading range | Up to 7 cm |
| Distances | Up to 1200m RS485 bus length between controller and reader |
| Protection class | IP41 |
| Operating temperature | -10°C ~ +50°C |
| Humidity | 10% ~ 95% (non-condensing) |
| Weight | 100g |
| Dimensions (W/H/D) | Standard stand: 85x85x22mm Thicker stand: 85x85x37mm |
Similar products in this category
Quick online quote
Use our calculators for a quote. Fill in the form - Our consultants will prepare a dedicated offer
-
Quote form
Use our tool for a monitoring quote, provide basic information and receive the offer directly to your email
See
-
Quote form
Check how much the installation of an alarm costs, provide basic information and receive the offer directly to your email
See
-
Quote form
Quote an access control system in any facility. to specific zones and areas using any identification
See
-
Quote form
Get a quote for the costs of a double-leaf, sliding, garage gate for your building or property
See
Our recommendations
- City monitoring
- Home monitoring
- Estate monitoring
- Shop monitoring
- Pharmacy monitoring
- Parking monitoring
- Office monitoring
- School monitoring
- Warehouse monitoring
- Gas station monitoring
- Hard drive capacity calculator
- Lens focal length calculator
- Comprehensive expert support
- Efficient order processing
- Competitive prices, promotions, and discounts
- We care about consumer rights